Adjustable Tilt & Swivel Wall Mount Bracket for LCD
Here' an attractive, durable and verstile mount for your flat panel display. The tilt and slide mechanism with screw and lever locks almost has a "steam punk" look to it. The device is recommended for screens up to 30" and 60 lbs. The mount is made from steel and has a nice power coat finish.
The mount allows you to tilt the display up and down about 35 degrees off center max. You can swivel it side to side up to 50 degrees off center max. And, it will retract down to a depth of 3.25" when parallel and even to the wall and extend out to a maximum of about 5.75".
It will support any display within the weight limit that has a VESA 75 or 100 compliant mounting pattern. (Vesa 75 is a square hole pattern where each hole is about 3" apart vertically and horizontally. Vesa 100 has holes that are about 4" apart.)
VESA Compliant: Yes - 75 and 100
Dimensions: 103mm (4 1/16") high x 124mm wide (4 7/8") x 82mm to 150mm deep (3.25" to 5.75")
Maximum Wieght Capacity: About 60lbs
Mounting Hardware Included: 4 lag bolts and 4 optional concrete anchors. Machine screws for mounting to panel are not included.